Vibration & Noise Isolation Products

Building regulation in accurate with European Standards determine that noise from drain pipe lines should not exceed 35db in the areas adjoined.

Applied to the drain lines will bring the noise level in the adjoining areas for below the requirements of the European Building Regulations.

Is an environmental friendly product. No additional Global Warming or Ozone depletion. It is RoHS complaint and is free of MMMF (man made mineral fibres).

Is easy to install with almost no waste. Elbows and bends as well as T-pieces are provided with sound absorbing tape.

Download Product

Cup Spring Mounts

EFCUS Cup Spring isolators are recommended for use in isolating sources of noise and vibration located near critically quiet areas. They are highly effective for control of both high and low frequency vibration produced by reciprocating refrigeration compressors, pumps, packaged air-handing and airconditioning equipments, centrifugal and axial fans, inertia bases, internal combustion engines. etc.

View site

Open Spring Mounts

This unique range of open spring mounting uses an integral rubber end fixing of the spring which sets them apart from all other designs. Loose springs and plates are now history and high frequency and noise attenuation is provided regardless of whether rubber seating pad is used or not. Originally designed for use with type IPF Inertia Pouring Frames, the EFOS Mountings are now widely used to isolate vibration from every conceivable type of rotating and reciprocating machine. Some examples being air handing units, axial and centrifugal fans, low level pipe work, ductwork, condensing units, pumps, generating sets, chillers, etc. Where control of transient motion is required open spring mountings can be used in conjunction with our Viscous Dampers Type EFVD.

View site

Enclosed Spring Isolator

A unique range of spring mountings designed primarily for building services applications where the control of low frequency vibrations and noise emanating from mechanical plants is of paramount importance. The benefits of a combined rubber and steel housing for the spring have helped establish the KESI mount as an industry standard accepted by specifier, equipment manufacturers and mechanical services installers.

View site

Spring Viscous Damper

Reciprocating machinery creates large vibration forces which frequently require isolation from the surrounding building structure. Large forces or doubtful machine stability may require the use of an inertia block of steel or concrete to provide low dynamic amplitude on the machine whilst providing a stable and stiff base which may be supported by steel springs or other resilient devices.

View site

Cased Spring Mount

View site

Closed Spring Isolator

This unique range of Closed Spring Isolators uses an integral rubber end fixing of the spring which sets them apart from all other designs. Loose springs and plates are now history and high frequency and noise attenuation is provided with stable mounting.

View site

Spring Hangers

EFSH Spring Hangers consist of freestanding. laterally stable steel springs in series with a molded elastomeric element assembled into a stamped and welded hanger bracket. The hanger brackets and the springs are powder coated. Spring vibration isolation hangers are designed to provide high efficiency isolation from structure-borne vibration and noise. Springs are color-coded according to load ratings and are designed for 50% overload.

View site

Rubber Hanger

Constructed of a Neoprene Element in a square bracket. Compact Model for Space Saving Installations.

View site